1. Product and Company Identification
a.Product name : NEOTEX - 7606
b.Usage of product : Spin finish for Polyester FDY(SDY)
c. Company information : Tae Won Chemical Co.,
1729-2, Songjung-Dong, Gangseo-Gu, Busan, Korea
Tel + 82 70 8683 7550, Fax +82 31 558 7554
c.Date : 2011-1-20
d.Version : 0.0
2. Hazards Identification
a.Emergency over view : Yellowish clear liquid
b.Eye contact : Slightly irritation to eyes.
c.Skin contact : No more than slightly irritation toskin.
Not toxic if absorbed.
d.Inhalation : No more than slightly toxic if absorbed.
e.Ingestion : No more than slightly toxic if swallowed.
Significant adverse health effects are not expected to develop if onlysmall amounts
(less than mouthful) are swallowed.
3. Composition / Information on Ingredients
High Refined Oil
Secondary Alcohol ethoxylates
Castor oil hydrogenated, ethoxylated
Anti static agent
4. First Aid Measures
a. If in eyes : Immediately flush with plenty of water for at least 15minutes.
If easy to do, remove any contactlenses.
Get medical attention.
Remove material from skin andclothing.
b. If onskin : Immediately flush with plenty of water.
Remove contaminated clothing.
Get medical attention if irritationpersists.
Wash clothing before reuse.
c. If inhaled : Immediate first aid is not likely to be required.
If symptoms occur, remove to freshair.
Remove material from eye, skin andclothing.
d. Ifswallowed : Immediate first aid is not likely to be required.
A physician or PoisonControlCentercan be contacted for advice.
Wash heavily contaminated clothing before reuse.
5. Fire Fighting Measures
a.Flammability : Non-flammable
b.Hazardous products of combustion : carbon monooxide ; carbon dioxide
c.Extinguishing media : Water spray, foam, drychemical, or carbon dioxide
d.Unusual fire and explosion hazards : Non known
e.Fire fighting equipment : Fire fighters, andothers exposed, wear self-contained breathing
Equipment should be thoroughlydecontaminated after use.
6. Accidental Release Measures
a. Personal precautions : Use personal protection recommended in Section8.
b. Environmental precautions : Keep out of drains and water courses.
c. Methods for cleaning up : Contain large spills with dikes andtransfer the material to appropri-
ate containers for reclamation or disposal.
Absorb remaining material or small spills with an inert material and
then place in chemical waste container.
Flush spill area with water.
7. Handling and Storage
a.Handling : Emptied containers retain vapour andproduct residue.
Observe all recommended safety precautions until container is cleaned,reconditio-
nded or destroyed.
The reuse of this material`s container for non industrial purpose isprohibited and
any reuse must be in consideration of the data provided in thisdocument.
b. Storage : Stable under normal conditions of handling and storage.
8. Exposure Controls / Personal Protection
a.Eye protection : Does not cause significant eye irritation or eyetoxicity requiring special protec-
tection. Use good industrial practice to avoideye contact.
b.Hand protection : Wear chemical resistantgloves. Consult the glove/clothing manufacturer to
determine the appropriate type glove/clothing for a given application.
c. Body protection : Wear suitable protective clothing. Consult theglove/clothing manufacturer to
determine the appropriate type glove/clothing for given application. Wash co-
taminated skin promptly. Launder contaminated clothing and cleanprotecti-
ve equipment before reuse. Wash thoroughly after handling.
d.Respiratory protection : This material is notlikely to present an airborne exposure concern un-
der normal conditions of use. Avoid breathing vapour or mist. Use app-
roved positive pressure atmosphere supplying respiratory protection
equipment for a given application. Observe respirator use limitations
specified by the manufacturer.
e.Ventilation : Provide natural or mechanical ventilation to minimizeexposure. If practical, use lo-
cal mechanical exhaust ventilationat sources of air contamination such as proce-
9. Physical and Chemical Properties
a.Appearance : Yellowish clear liquid
b.PH (10% sol`n) : 6.0 ∼ 8.0
c.Solubility : Soluble in water
d.Boiling point : ＞250℃ (at 760 mmHg)
e.Vapour pressure : ＜0.01 mmHg (at 20℃)
f.Ionic : Nonion, Anion
g.Specific gravity(20/4℃) : 0.920 ± 0.02
Note :These physical data are typical values based on material tested but may vary fromsample
to sample. Typical values should not be construed as a guaranteedanalysis of any specif-
ic lot or as specifications for the product.
10. Stability and Reactivity
a.Conditions to avoid : None known
b.Materials to avoid : None known
c.Hazardous reactions : Hazardous polymerization does not occur.
d.Hazardous decomposition products : None known
11. Toxicological Information
No toxicity studies on this material and no toxicological informationwas obtained in a reasonably
extensive search of the available scientific literature.
12. Ecological Information
An environmental toxicity or biodegradation study with this material isnot available.
13. Disposal Considerations
a.Disposal considerations : Incineration, recycle
b.Miscellaneous advice : Local, state, provincialand national regulations may be more or less st-
ringent. Consult your attorney or appropriate regulatory officials forin-
formation on such disposal. This product should not be dumped, spill-
ed, rinsed or washed into sewers or public waterways.
14. Transport Information
The data provided in this section is for information only. Please applythe appropriate regulations
to properly classify your shipment for transportation.
US DOT Others : Not regulated for transport.
15. Regulatory Information
a.Regulation due to the industrial safety hygienic law : Not available
b.Hazard Notification (
- Hazard categories (40CFR370) : Not applicable
- Section302 extremely hazardous substances : Notapplicable
- Section313 toxic chemical(s) : Not applicable
c. CERCLA reportable quantity: Not applicable
16. Other Information
Suggested NFPA rating
Although the information andrecommendations set forth herein are presented in good faith and believed to becorrect as of the data hereof, Tae Won Chemical Co., Makes no representationsas to the completeness or accuracy thereof. Information is supplied upon thecondition that the persons receiving same will make their own determination asto its suitability for their purposes prior to use. In no event will Tae WonChemical Co., be responsible for damages of any nature whatsoever resultingfrom the use of or reliance upon information. No representations or warranties,either express or implied, of merchantability, fitness for a particular purposeor of any other nature are made hereunder with respect to information or theproduct to which information refers.
韩国太远化学株式会社，座落于韩国釜山市江西区松亭洞1729-2号。主要研发纺丝油剂，太远TW纺丝油剂目前在全球范围内处于优势地位，在全亚洲范围内基本处于领先地位。TW纺丝油剂被广泛用于纺织行业，主要产品有：Polyester 聚酯涤纶、Nylon 尼龙、Polypropylene 聚丙烯 (俗称PP)、Dyeing auxiliaries 染色助剂。